Hyundai HIT18s with Siemens 840C ...I killed it.
My computer guru took out my hard disk to clone it. Per Siemens web site Ghost is bad, so he used a Linux box to image it. The computer tried to boot off the drive, this is where we believe the trouble occurred. The machine will no longer boot up. I get this error " The FlexOS system image you booted does not support your hard disk and will not execute properly." "Power off your machine and insert your Application Programmer's Toolkit disk #1 in drive A:. Execute the INSTALL program to install the correct FlexOS system image to your hard disk."
This is a DR DOS 6.0 system and the MMC version is V04.01.12 dated 94/10/27
MMC system check passes.
Anyone out there who can offer some advice? anyone have a set of OEM disks for this thing?
Re: Hyundai HIT18s with Siemens 840C ...I killed it.
Hello dears.
We machine is battery loss problem and change battery.
Mmc file checking is all files error.
I can restore nc plc and all other md files. But 43 ord1 plc cpu not operation ready.
Please hit18s 840c hdd images. And mmc install procedure.
[email protected]
Re: Hyundai HIT18s with Siemens 840C ...I killed it.
After this cloning were you able to use Valitek or PC link?
Please let me know if you still remember this operation...
Re: Hyundai HIT18s with Siemens 840C ...I killed it.
Quote:
Originally Posted by
ROMCON
After this cloning were you able to use Valitek or PC link?
Please let me know if you still remember this operation...
To transfer in G-code files? or something else?
Re: Hyundai HIT18s with Siemens 840C ...I killed it.
Hi
I have same problem. The Hard Disk of my Simmens 840C was damaged. I installed DRDOS6.0 (someone told me this all) then past all machine data on HD then I start the machine but after boot up it stuck on
Loading.....
when i install the hard disk to my laptop then it starts with a maintenance manu.
can you help me please...
Re: Hyundai HIT18s with Siemens 840C ...I killed it.
Quote:
Originally Posted by
cic108
Hi
I have same problem. The Hard Disk of my Siemens 840C was damaged. I installed DRDOS6.0 (someone told me this all) then past all machine data on HD then I start the machine but after boot up it stuck on
Loading.....
when i install the hard disk to my laptop then it starts with a maintenance menu.
can you help me please...
If I remember correctly we had to use an old DOS computer to install DR Dos to the hard drive. Windows and Linux both did something that would make the disk error. I hope this helps.
Re: Hyundai HIT18s with Siemens 840C ...I killed it.
Quote:
Originally Posted by
BNR_RANDY
If I remember correctly we had to use an old DOS computer to install DR Dos to the hard drive. Windows and Linux both did something that would make the disk error. I hope this helps.
Dear
first of all I installed DRDOS6.0. The PC then booted good with DRDOS environment then I copy and past all data (that I have copied many days earlier) to new HDD. Then I restart my PC but it stucks at (Loading FlexOS.....) and computer hangs. After that I attached this HDD mchine's MMC unit and turned the machine ON. It boot and hang up with the message ' Loading....." . thats all
Please tell me what is wrong?
Note I dont have any clone OR image of HDD. I just copy and paste all files and folders including hidden and system files.
Thanks
Re: Hyundai HIT18s with Siemens 840C ...I killed it.
I did not have mine hang with "loading" I am not sure If I can offer any more help. I will ask the other guy that helped me and see if he has any ideas.
Re: Hyundai HIT18s with Siemens 840C ...I killed it.
Hi. Can you send a hdd backup? the hdd just failed in the machine. the administrator touched it...