Today I click accidentally on F1 key and help appears.
I was amazed because I saw that the icons were different !!
Will the 2016 version will have a visual modification?
http://www.cnczone.com/forums/attach...d=301578&stc=1
Printable View
Today I click accidentally on F1 key and help appears.
I was amazed because I saw that the icons were different !!
Will the 2016 version will have a visual modification?
http://www.cnczone.com/forums/attach...d=301578&stc=1
Does anyone get 2016 version?
It became available the 25th of last month in the Vero Portal.
Its now called Surfcam Traditional 2016 R1.
Found my first glitch.
Moving geometry from one layer to another causes a complete shutdown of Surfcam without warning.
Could not reproduce this error. Here works normal.Quote:
Originally Posted by Billetgrip
One thing I notice is CTRL+V, to activate Cview don't work.
Happens on my work AND home comp. About to load it on the other 3 comps here and see if it happens.Quote:
Originally Posted by forjaco
Try CTRL+CQuote:
Originally Posted by forjaco
I try and at 2nd It closes. I open again and keep trying about 5 times and are OK.Quote:
Originally Posted by Billetgrip
CTRL+C are OK, but not CTRL+VQuote:
Try CTRL+C
http://www.cnczone.com/forums/attach...d=306612&stc=1
Have you found any advantage to using 2016 over 2015 yet?
So far the only improvement I've found is the "Face Mill" toolpath seems to make more sense when using the spiral method. It doesn't make that useless pass in the middle anymore.
No. Today I report 5 bug to support.I will continue to use the 2015 until 2016 be corrected.Quote:
Originally Posted by Billetgrip
At C:\Users\Public\SURFCAM\SURFCAM2016\Config\
Open surfcam.ini
Find UseNewToolbarStyle=1
Change 1 to be 0
You will get the 2015 Icons