I have a problem with my Heidenhain TNC 410 Milling Machine
error # C310 Z1 TRACK X ERROR
All cables and drives are OK.
I changed pulse encoder but still i have the same error. Can anyone help me
Thanks
Printable View
I have a problem with my Heidenhain TNC 410 Milling Machine
error # C310 Z1 TRACK X ERROR
All cables and drives are OK.
I changed pulse encoder but still i have the same error. Can anyone help me
Thanks
The problem is on the encoder inside the motor.
That is either broken or contaminated. Needs to be adjusted correctly.