HI, Guys I,m new to Mach3. I,m using an older micro proto running Mach3.
When I,m drilling a bolt pattern the machine is drilling the hole on the left side
of a plate Mach thinks it,s on the right side.
Printable View
HI, Guys I,m new to Mach3. I,m using an older micro proto running Mach3.
When I,m drilling a bolt pattern the machine is drilling the hole on the left side
of a plate Mach thinks it,s on the right side.
Check your axis scaling in Mach3. It should be "1" and not "-1". Hope it helps
farmertom
Or, you have your machine set up with one axis backwards.