My 12 year old excitech 9060 step driver just failed and am trying to find a replacement
any help will be much appreciated
im in brisbane
the driver is a MS-2H057M from shaphon Co ltd usa
apparently they are not made anymore
Printable View
My 12 year old excitech 9060 step driver just failed and am trying to find a replacement
any help will be much appreciated
im in brisbane
the driver is a MS-2H057M from shaphon Co ltd usa
apparently they are not made anymore
Hello.
A simple googling gave me this:
https://spanish.alibaba.com/product-...117918185.html
https://es.aliexpress.com/i/32842902460.html
Regarding a replacement it should be fairly simple as it is a 48V/3A drive. Just check for the number of step configuration that you require. It is possible that most of the new ones if not all have your configuration.
Regards.
thank you
i did the googling and everything seems fine right up to when you go to order/pay when they say 'this item is not avalable'
thanks again
Is this one what you need?Quote:
Originally Posted by rocabig
https://www.paycnc.com/ms-2h057m-mic...ver_p2497.html
i have been told the DM542T will do the jobQuote:
Originally Posted by cncmakers001
i have one on order
thank you everyone for all your help
The DM542 will do the job. I quite like them. If you are really stuck and sick of waiting I'd have one here at Acacia Ridge, Brisbane.