HELP ME! Muratec C3000

I have a Muratec C3000 CNC punching machine. Fanuc OOP. I cleared all parameters to reload by pressing button 0 + Delete + Power on. But after starting the machine in a suspended state as shown below. When I press the MMC/NC button while the machine is booting, the machine enters the Fanuc screen but cannot switch to MDI mode to activate parameter writing. Do you have a way to reload this machine's parameters, please help me.

Do you have machine's parameter? ( FD, PAPER LIST, ETC )

Quote:

---

Originally Posted by baonam2019

I have a Muratec C3000 CNC punching machine. Fanuc OOP. I cleared all parameters to reload by pressing button 0 + Delete + Power on. But after starting the machine in a suspended state as shown below. When I press the MMC/NC button while the machine is booting, the machine enters the Fanuc screen but cannot switch to MDI mode to activate parameter writing. Do you have a way to reload this machine's parameters, please help me.

---

Are you unable to input parameters in any way? You may have to manually input your 9000 series parameters first.

do you have the parameters of this c3000

1013 IN PUNCH CYCLE it gives me this error