2 Attachment(s)
Trumpf Trumatic L4050 5kw
Newbie here! Having a few issues with my trumatic L4050 trumpf laser.
First issue was the calorimeter, which upon getting fixed, has thrown another alarm, PLC (80.100308) lens sensor system sensor module signals new lens defective. However I have tried different heads with different lenses and it still comes up with this alarm.
I’ve since disabled the sensor in focus menu 154, but to my frustration has thrown another alarm, NCU (00.010654) channel 1 waiting for sync start of gantry compound 1,
Then,
PLC (52.102002) GANTRY. Gantry compound 1 has exceeded the set number of errors! The offset is larger than 500 1/1000th mm.
Any idea how to solve this?
Thanks in advance