Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3

https://www.youtube.com/watch?v=raEnRTrHFIU

G0704, BF20L, PM25MV CONTROLLER WITH STEPPER MOTORS WITH ETHERNET CONNECTION
Detail Page Link: https://www.automationtechnologiesin...f20lcontroller

This Controller is for G0704 or BF20L or PM25MV, X3 Machine

mill machines

It is assembled and tested with Mach3 software. it will work for sure for your machine

Digital Stepper Control Box and X and Y , Z Stepper Motor.

1: Controller Box: Aluminum Box (up to 6 axis)

2: 2 PCS KL-5056E Bipolar Digital Stepper Drivers, 50V, 5.6A for X, Y Motors

3: 1 PCS KL-8070D Bipolar Digital Stepper Drivers, 80V, 7.0A for Z axis Motor

4: 1 PCS 48V/12.5A Power Supply, 115V/230V

5: Ethernet Board: Mach3 or Mach4 Ethernet board

6: 1 PCS Fan

7: 1pcs 24V and 5V Power Supply 110-230VAC

8: Power cord

9: X,Y Stepper Motors, NEMA23 570 oz-in, 5A, 3/8" Shaft, or 1/4" Shaft

10: Z Stepper Motor, NEMA34 1200 oz-in, 6A, 1/2 inch shaft with 12 feet cable