OKUMA LB15 II MW

anybody have LB15 II MW manual file ? please help me!

Re: OKUMA LB15 II MW

hy, i shared a programing manual in here, at post 3, for a newer machine, but it should be compatible to some extend : https://www.cnczone.com/forums/okuma/393294-cam.html

are you looking for a specific operation type ? kindly :)

Re: OKUMA LB15 II MW

Quote:

Originally Posted by deadlykitten

hy, i shared a programing manual in here, at post 3, for a newer machine, but it should be compatible to some extend : https://www.cnczone.com/forums/okuma/393294-cam.html

are you looking for a specific operation type ? kindly :)

thanks deadlykitten.
I have problems with the sp spindle boot. although I left the G141 but I still can't move it. The error message. for example: G141
G0 W100, the machine will give an error. With M247 machine also reported an error. I have tried everything. Including the use of your command line above but it did not work.