Printable View
Hello everybody
We never had a operation on the W axis on our Okuma LB300 and nobody knows how it works- so I would need your help:
We want to program the following:
1. turn side on the main spindle
W-Axis should take piece
Cut off
W-axis drives odd
2. Turn side on the opposed spindle.
Thank you in advance
Caddy
Hello
What controller have you got on your machine?
What exactly do you need? -Only hand over or do you not have any experiences with the machine ( for the programming), zero point for main and other spindle, set W axis.....
Regards
McSti
Good morning
We have the OSP-P200L !
We have done “normal” milling, turning with the Y axis before. However we always used the opposed spindle as a tailstock.
We never needed it for anything else ( it used to be a demonstration machine,otherwise we would not bought an opposed spindle)
Regards
Caddy