I have a 1999 Okuma MX 45VAE w/OSP7000M control with a Floppy drive and I would like a conversion to USB if possible, any directions or suggestions??? Any help is appreciated.
Printable View
I have a 1999 Okuma MX 45VAE w/OSP7000M control with a Floppy drive and I would like a conversion to USB if possible, any directions or suggestions??? Any help is appreciated.
Check once again if your OSP is equipped with USB. Shouldn't be.
No looking to convert to USB I have a floppy.. Looking for the right set up that proven and how to do it.Quote:
Originally Posted by Algirdas
did you try:
jumpers on MO; S1; JA and JB ?
I have a Floppy Disc drive in my control panel I want to replace it with a USB emulator in its place. I need a emulator Model No#?? and wire/pin configuration ?? that will work. Wire Diagrams, directions any suggestions??
SFR1M44-U100K?M0?JA?JB?JC?
Information about this has been given before. If you search the forum you can find this information.
Quote:
if control unit is OSP7000 , you must use 4 jumpers on MO,S1,JA and JB
if unit is U100, 2 jumpers on MO and JA