ER2 alarm on Fanuc controller O-T

Hi guys
Today when i turned on the machine , the ER2 led was red , no alarm text or error code in screen , can change turrut or spindle , but can go home or move axis ,by the way oil is full , plz help me :(

please send or post pic of the alarm

Quote:

---

Originally Posted by mbservice

please send or post pic of the alarm

---

Ok see

in this error ER2 on Victor machine there are so many posibilities to generate alarm so will be very difficult for us to trace it.
i can help you but you need to photo the ladder completly when the alarm is generated.
good luck

PS:i worked for Victor Machinery 15 years so i know what i say.

Quote:

---

Originally Posted by Hamid35

Ok see

---

Change your batteries there is an alarm showing at bottom of screen

Quote:

---

Originally Posted by mbservice

Change your batteries there is an alarm showing at bottom of screen

---

Tnx

Quote:

---

Originally Posted by zavateandu

in this error ER2 on Victor machine there are so many posibilities to generate alarm so will be very difficult for us to trace it.
i can help you but you need to photo the ladder completly when the alarm is generated.
good luck

PS:i worked for Victor Machinery 15 years so i know what i say.

---

Problem fixed , i changed battery it works !!!

hello sir ? have this alarm code only er2 and ? changed battery but it dont turn off. it dont move spindle and turret