3 Attachment(s)
Phoenix USB CNC Controller 3 Axis plus 4th Axis Slave Output by Hayri Uygur
Hello dear forum members,
I would like to say hello and introduce my Phoenix USB CNC Controller.
I have read countless post on this wonderful forum but never had the chance to post anything. Recently I stumbled upon a thread while searching for Grbl G-Code Sender software and figured I could post info about my Controller that I build to control my self build Vertical CNC Mill. I will post info about it soon.
After searching for Controllers and not finding anything that I liked, I designed and build my CNC Controller. I made 6 of them and sold them on eBay. This one here is the second version of it. It has the following features:
3 Axis USB CNC Controller with Grbl 0.9i (latest version) with Step and Dir Outputs for each Axis,
Switchable 4th Axis output for slave Y-Axis in case there are 2 Stepper Motors on the Y-Axis,
0-10 Volt PWM Output to Control Spindle Speed with G-Code or,
0-5 Volt PWM Output to Control Laser Driver or any Voltage in between,
Output to turn On and Off the Spindle,
3 Limit and E-Stop Inputs,
Input for Star/Resume, Stop/Hold and Reset Switches,
Probe Input to determine Workpiece Height,
Homing function with G38.2 G-Code,
Output Control via bright LED's,
12 -24 Volt Supply Voltage,
Possible to upgrade to higher Version of Grbl, unused A4 pin already connected to screw terminal,
Here is a link to my eBay page:
Neue 3 Achsen Axis USB CNC Steuerung Controller 0-10V PWM Ausgang Output E-Stop | eBay
I hope it is not against the rules to link external websites to this forum, if yes please let me know and I remove the link.
If anybody has questions or wants to know something please feel free to ask.
I am also in the designing stage of another Controller that has 4 DRV8825 drivers already on the board. That way it will be a complete solution for small to middle sized CNC's.
With this card I am controlling Nema 34 Steppers with CWD556 Stepper Drivers.
Thank you for your interest.