Gildemeister CNC Lathe NEF CT 40
It seems like Gildemeister lathes are not that easy to fix, because no one gives helpful advices. Even DMG Romania are not helping with anything, so i have to try fix it by myself, without any wiring diagram, and that's not easy... Lately, i've been having this issue: when i turn the power on, i get ERROR 431 (Chuck, no spindle enable) and i can't do anything to get rid of it. I placed a part in the chuck and locked it but still, the error won't go away. I called for a tech who usualy helps me fixing my machines and he said he's going to come see what's going on, in a couple of days, but since i don't have any wiring diagram, i don't think he would figure it out just like that. Does anyone around here have any idea on what should i check or where should i look for the problem? I sure hope someone can help:) Thank you.
Grigore Borota
Romania
Re: Gildemeister NEF CT 40
Hello!
I am new here. Have a problem with a CT40.
when i started i have:
NC_PROGRAM MEMORY......................ERROR
NC_PARAMETER MEMORY...................ERROR
And when i go in manual mode i have error 0964 Checksum error in parameter.
Could you help me with that?
Re: Gildemeister NEF CT 40
hello everyone.
aboul gildemeister epl2 0.861.68-11.2 BFC, does anyone have a copy of eprom?
could share with me?
thanks.
FlashPT
Re: Gildemeister NEF CT 40
do you solve the problem?
thanks
Guima
Re: Gildemeister NEF CT 40
I have a problem with control card SET-10, where can I find one?
Do you know FlashPT?