Wire Cut Robofil 310 Regulator Alarm

Hello,
I am working with Robofil 310, I need help, In our machine we are getting a series of alarms while cutting is in-progress, the alarms are
E903: Regulator Error UPA
E913: Regulator Error UPR1
E915: Regulator Error UPR2
E905: Regulator Error UPR3
E907: Regulator Error UPR4
E910: Com Error UPA
E912: Com Error UPR1
E914: Com Error UPR2
E906: Com Error UPR4
We are unable to remove it, please help!
Shairyar

Our problem is solved. We replaced E/S PIL board. The machine is working properly now.

Quote:

---

Originally Posted by shairys88

Our problem is solved. We replaced E/S PIL board. The machine is working properly now.

---

I have this Problem Too
i want know the reason of this error?

I have COM. ERROR UPR4, UPR3, UPR2 And UPR1.

My engr have replaced E/S PIL Board, Optical Cables, PA/SA Card, Swapped the UPR Boards. But no changes. The same error i am getting. Kindly let me know the solution if you have the idea. Your suggestions will be highly appreciated.

Thanks & Regards
Chandran