Doosan DNM 540 parameter change
Hi, we are having a Doosan DNM 540 Milling machine with a Fanuc control. The machine does have a built in (hidden ) program (MO2)for spindle warm up in the morning. We would like to make some alteration in the way the spindle is running, making it to rotate for 2min clockwise and 2min anticlockwise, thus saving some times.
Now to achieve this we neeed to change a certain parameter where the new program will be store in order to replace the # O2 program.
What will be that parameter?
Thanks in advance.
Re: Doosan DNM 540 parameter change
That m02 is going to be tied into a 9000 program i believe. Parameter 3202 ne9 make a 0 which unlocks 9000 programs and allows you to edit. ;))