Radius to end of arc differs from radius start
I am having trouble getting Mach3 to do a profile cut using Dolfincam. I get a Radius end of arc differs from radius start. I'm using the T_Mach3DCSS post processor. I'm cutting a ball on the end of a rod. Any Help would be greatly appreciated.
Thanks
Donald Clifton
Re: Radius to end of arc differs from radius start
Change the IJ mode in General Config and see if that fixes things.
Re: Radius to end of arc differs from radius start
Thanks Ger, That's the first thing I tried. Do you use Dolfincam? Your always real helpful.
Thanks
Don Clifton
Re: Radius to end of arc differs from radius start
Don, I just emailed you 2 different posts to try (one for radius and one for diameter).