How to get a Mach3 post proc. for Mastercam 2022 ??

1st, should be; does anyone knows if there such thing, a Post P from MC-2022 to post on Mach3 ?

Tried to migrate from MC2017 to MC2019.....will simply not, MC 2019 to 2022...seems Mach 3 will not be taken ??

Any leads, direction would be much appreciate.

Thanks

Help please !!

Hi Robert, did you have any luck with this?

Hi,
Mach, 4 more so than 3, but both follow Fanuc21i.

If you can't find a Mach specific PP then try Fanuc21i. Mach4 is particularly close and by design.
All development on Mach3 ceased eight years ago, maybe Mastercam gave up on it.

Craig

Thanks Craig....but tried that one and....not being a "gooroo" behind those (post processors programing !!)..... there's "defiantly" a difference in such.= posting with that has "glitches" and act / react (while in motion) not right ?!

There "must" be a better alternative ( I imagine / assume).... so many Mach3 users, surly some are also using M/C and have issue or soled this ?

Cheers...thks mate