deckel FP5NC Dialog 4

Hello to everyone.
Can someone please help me?
I've buy this Deckel a week ago, and I have also get the 4th axis. But I can't bring the 4th axis to life.
If someone could help me, I would be realy thankful.
BR
Matej
Slovenia

Hello,
i am not shure, that is your problem but i try to explain. i need to tell this is over 20 year ago i not something.
1. power off the control (not the machine)
2. press F5 -> tables
- z-axis always on
- angle table on = round table off
- nc round table on = 4th axis on
3. power on controller
4. button MODE -> Text -> F2 (4 Axis)
5. BA1 -> next step -> F1 (referenzpoint) -> choose X-Y-Z-C

Thats what i have write down before 20 years. maybe it brings you forward.

edit: excuse. it was a Dialog 11.

The above instructions won't work on the Dialog control you have.

Did you get this running?
Looks like you are missing the NZP59 board for the 4th axis