Printable View
Hi, I recently bought a troublesome 98 FEMCO HL25E among other issues is that the operator panel is so badly worn that the silk screen is unreadable. On many of the push buttons the lens and legends have broken off. The operation manual does not have an illustration either and I am a beginner. The controller is a Fanuc 0T(A) to the best of my knowledge. Can someone with this machine please send me some pictures of the control and operator panel? Any manuals would be helpful also! Thanks Jim
New to the site and just saw your post in 2011 .,,,,
were you able to purchase the soft covers for your control
also have you had to purchase any new buttons for your other
panel...... ours pops off and get carried out in chips over years and
we need to purchase more...... can you offer up any help in this manner
thank you in advance
Help me please,
I have lost the 900 parameters of femco hl-25, with fanuc 0t control, the serial number is L12-0802, my problem started because the turret servo lost the battery, and trying to solve it, I performed a hard reset without realizing that my backup did not have parameters 900.help please
[email protected]
please help me