Roland Modela MDX-3/Picza PIX-3
If any body could help me, I have just acquired stewardship of a Modela MDX-3 and Picza PIX-3 Tandem of machines. I have not been able to find the original drivers, all the updates seem to be out there but not the original Dr Picza bundle that came with the machines which leaves me all revved up and no place to go. These machines have never been used , so if any body could help me it would be greatly appreciated ,
Picza and Modela Software Bundle Sent
Fausto,
I have sent you everything anyone could every need for any one of the Roland PIX or MDX series machines. I've included all the manuals and a tutorial movie as well. Install from the CD menu first before installing updates. The latest version updates may not work properly with the older version MDX machines so check them out carefully and make sure all functions work. (Check for this glitch: See if you can add a new toolbit size, if you can't roll-back to the next earlier update.) Aside from that MDX update issue, all the PIX updates and evrything else works great. I sent it in a RAR file. (47MB) Let me know if you got it. It's has been checked for viruses as well. Good luck.
Regards,
Sal
Re: Roland Modela MDX-3/Picza PIX-3
Hi guys (n Gals)
I amalsolooking for Dr Picza PIX 3 software
rapidshare?/
Re: Roland Modela MDX-3/Picza PIX-3
Dears can anyone uplaod the MODELA MDX-3 softwares again? i just aquired one and it didn't have any software cd. thanks
Re: Roland Modela MDX-3/Picza PIX-3
Quote:
Originally Posted by
dish0n0red
Dears can anyone uplaod the MODELA MDX-3 softwares again? i just aquired one and it didn't have any software cd. thanks
Here is a DropBox link. Let me know if you have any problems.
https://www.dropbox.com/sh/yitwxwngi...OjU4BpjFa?dl=0
Regards
David
Re: Roland Modela MDX-3/Picza PIX-3
I've acquired an MDX-3 and have "bodged" together a powersupply for it and have managed to get it connected up, but I cannot get Vpanel etc. to see it.
I need the drivers, however Roland have obviously discontinued support for this model now, so there aren't any available for Windows 10. Does anyone know of any updated drivers, a driver for another machine that will do the same job, or any other way to get it to work?
I'm still fairly new to all this so forgive my "newbie" attitude.
Any help will be greatly appreciated.
Many thanks
-Zack