why does it change my tool diameter on a second Z profile?
i have only one tool described
took me a minute to isolate the issue
https://imagizer.imageshack.com/v2/xq70/924/ZlBHjh.jpg
Printable View
why does it change my tool diameter on a second Z profile?
i have only one tool described
took me a minute to isolate the issue
https://imagizer.imageshack.com/v2/xq70/924/ZlBHjh.jpg
view of the 2 profiles up top
https://imagizer.imageshack.com/v2/xq70/924/FrR3T0.jpg
plus mirror does not mirror
even if i set repeat to none....
https://imagizer.imageshack.com/v2/xq70/923/42jwjA.jpg
Hello,
The tool size isn't changing.
With the Tool view set to Envelope, this is showing the effective diameter at the given depth.
Regards
Andre
Hello
Yes, there is an issue with Mirror on Z profiles.
You will need to use Rotate 180
Regards
Andre
both have the same depth and placement
https://imagizer.imageshack.com/v2/xq70/923/mQ4p2F.jpg
https://imagizer.imageshack.com/v2/xq70/924/o9pYC4.jpg
i see
why is the depth different with the same dimensions?
https://imagizer.imageshack.com/v2/xq70/924/Vu21T8.jpg
ok i got it
my profiles start at different depth!
thanks for talking me through it. lo
https://imagizer.imageshack.com/v2/xq70/923/00E8QU.jpg