From Syil Machine Corporation !

Hi, Every Syil Users, Long time not log in on the cnczone , during last some years we have big change and progress for CNC machine tools business,
we mostly become the biggest CNC machining center OEM/ODM manufacturer in China, and now we also invest much more on the small CNC machines.
if anybody looks our webpage Affordable CNC Machine | Best CNC Machines | Personal CNC | SYIL will see different.
so I would like if see someone could help us with some content construction who have SYIL machine, and I would interesting have a talk and if any good suggestion and advise for us, will be more helpful too.
my direct email address is [email protected]

Our Instagram address is SYIL MACHINE CORP (@cnsyil) ? Instagram photos and videos and welcome everyone to have a look...to see our growth and good share..
have a good day.
Syil Machine Corp Team.

Well, it is nice to see someone is there!
You should be aware that I have sent a few emails to yourselves and never got a reply - mainly asking about spares.
I hope your investment includes after sales support.:)

Matt

what model you need spare parts,let is fix it ..

Hi,

It is a bit late now.
I ordered an LCD panel from china and soldered an edge connector to it and now that bit works.
The gas strut was replaced with assistance form guys on here.

Are you offering any pneumatic tool change options?

Matt

Quote:

---

Originally Posted by Clockworld

Hi,

It is a bit late now.
I ordered an LCD panel from china and soldered an edge connector to it and now that bit works.
The gas strut was replaced with assistance form guys on here.

Are you offering any pneumatic tool change options?

Matt

---

if very old type x4 or x3 will be a little difficulty except remove the head of the machine, you from U.K?
please sent emails to us,then we check it..

Quote:

---

Originally Posted by syil

if very old type x4 or x3 will be a little difficulty except remove the head of the machine, you from U.K?
please sent emails to us,then we check it..

---

Not sure what you mean by this. I have sent an email to [email protected]

Machine is an X4+ (oldish)

Regards, Matt

Like Matt, I am surprised how poorly the response is to customer inquiry, I have been waiting on replies to my emails for months, my X4+ is down still and I have set my mind on gutting it and starting over using a Centroid Acorn. I sent the attached pictures and requested the wiring diagram as I had to replace one of the drives for the X axis, and regrettably left my documentation on the seat in front of the machine, we had a flood hit where I live and I lost my documentation though the machine didn't get wet thankfully. However I have some low voltage wiring that I am unsure of.

I have emailed several times asking for any available documentation on the following boards,
East Crystal PCF07483 Rev 1.1 and 08094 rev 1.1

East Crystal 07434 ver 1.4



Syil M&C SL-1100-1 (5.1)
2008.8.4


Attachment 389202Attachment 389202

I have very little faith that I will come to a solution to the problem with the current configuration, the support for older machines is very limited and I understand there has been revision to the machines. I have one of the first X4+ machines (110 Volt and no electronics cabinet). I would at least like support on the Spindle board, as it was clearly in house.

Any help from anyone would be appreciated,

My boards are made by East Crystal as well. I have also seen them referred to as Tonman Drivers but that is all I know.
Attachment 389276
What drive did you replace it with?
Matt

Quote:

---

Originally Posted by Clockworld

My boards are made by East Crystal as well. I have also seen them referred to as Tonman Drivers but that is all I know.
Attachment 389276
What drive did you replace it with?
Matt

---

I found some original drives. I had to man electrics also. One blew a fuse so I have extra. What spindle board do you have?


Sent from my SM-G900V using Tapatalk

Not sure. Will check tomorrow if the snow has subsided!!
Matt

Quote:

---

Originally Posted by Clockworld

Not sure. Will check tomorrow if the snow has subsided!!
Matt

---

Good luck. I hope you guys get a break. What I'm most interested in is to find out some of the low voltage wire routing, I lost my documentation and Syil has been if no help.

Sent from my SM-G900V using Tapatalk