2000 model VS50 spindle noise
Hi, my trusty old 2000 model VS50 has developed some spindle noise. It is equipped with the 4500 rpm spindle and I think the noise is coming from the lower bearing (closest to tool) however it still feels nice and smooth to turn by hand. The noise is there throughout the rev range but loudest at lower revs..say tapping a hole etc. . I don't have any diagrams for the spindle and am wondering if there are some bearings up the top in the tool grab assemble that I should possible check first or is that all part of the spindle bearing setup?? Thanks
Re: 2000 model VS50 spindle noise
A quick update on this thread...there seems to not be a problem now. I was sure it was bearings but when I got a technician out to help me pull it out and send it off to be rebuilt, he didn't agree. He kept saying it was normal, but I have had the machine for six years and definitely noticed a big change. However, this guy did his apprenticeship with Hitachi in Japan so he should know. With this in mind I put the covers back on and put it back to work. It has now been several months, and the noise has disappeared...it sounds as quiet as when I got it. Buggered if I know what was going on.