problem about Miyano TSV-21 Fanuc 0M-A ATC Alarm

Dear Sir,

First of all, Thank you for your reading my e-mail.

I have 1 Miyano TSV-21. The control is Fanuc 0M-A. The problems are all about ATC.

When I command to change from tool 6 to 7 or 9 to 10. The machine work probably.

But when I want to change from tool 10 to 1. The ATC will not rotate to its proper tool's position. After that will occur ATC Alarm.

I need to set up the tool number but I don't know how to set it.

Can you provide me how to set it up?

Thank you again for your cooperation.

Best Regards

Does anyone has parameters for a Miyano TSV 23?
Control FANUC 0M
Thanks
Robby

Quote:

---

Originally Posted by ixoxi999

Dear Sir,

First of all, Thank you for your reading my e-mail.

I have 1 Miyano TSV-21. The control is Fanuc 0M-A. The problems are all about ATC.

When I command to change from tool 6 to 7 or 9 to 10. The machine work probably.

But when I want to change from tool 10 to 1. The ATC will not rotate to its proper tool's position. After that will occur ATC Alarm.

I need to set up the tool number but I don't know how to set it.

Can you provide me how to set it up?

Thank you again for your cooperation.

Best Regards

---

Any body can help me how to zero reference ATC of Miyano ATC-21 with Fanuc OM control Year 1989. OR may send me photo of Manual pages contain how to zero reference ATC. Earliest response appreciated. Thanks, Ejaz , [email protected]

Any body can help me how to zero reference ATC of Miyano ATC-23 with Fanuc OM control Year 1989. OR may send me photo of Manual pages contain how to zero reference ATC. Earliest response appreciated. Thanks, Ejaz , [email protected]