STAMA MC 530 1995 FANUC 16M all parameter lost
Hello
I have a problem. I lost my all parameters from machine. Machine is empty. Im lost ladder and other parameters. Maybe there is a person who has such a machine and can download the parameters from the machine to me?
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
What makes you think that the ladder is gone? The (nc and pmc) parameters I understand, but not the ladder or system files.
4 Attachment(s)
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
I have problem and alarm with RAM parity. Then I reset memory, then i lost parameters and lost ladder. Earlier I had a problem with a computer that was being repaired, possibly it was the cause.
I have parameters files to backup and got ladder files from factory. How to upload ladder to the ROM? Which files are from ladder?
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
pablowlkp
I have problem and alarm with RAM parity. Then I reset memory, then i lost parameters and lost ladder. Earlier I had a problem with a computer that was being repaired, possibly it was the cause.
I have parameters files to backup and got ladder files from factory. How to upload ladder to the ROM? Which files are from ladder?
Hello:
You don´t need to upload the ladder. Once you reset the machine, (clear memory) you should see many alarmas indicating you lost all parameters. Why would you enter the Boot system (System check screen)? Do not do anything in there.
The ladder should appear as soon as you enter all Nc parameters.
Regards
AlexFanuc
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
alexfanuc
Hello:
You don´t need to upload the ladder. Once you reset the machine, (clear memory) you should see many alarmas indicating you lost all parameters. Why would you enter the Boot system (System check screen)? Do not do anything in there.
The ladder should appear as soon as you enter all Nc parameters.
Regards
AlexFanuc
Thanks. I'll try.
I went into system screen because I think I deleted the PMC file by accident. One file is missing.
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
pablowlkp
Thanks. I'll try.
I went into system screen because I think I deleted the PMC file by accident. One file is missing.
Do you have the main PCB part number?
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
This number is on main board: FANUC 16MB A02B-0200-B503 / MAIN FS16B , CPU board number is A16b 3200 0010/07A
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Post all of the M5301159.#xx files. I can convert these files to a MEM file that you will be able to load into your machine.
2 Attachment(s)
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
drdos
Post all of the M5301159.#xx files. I can convert these files to a MEM file that you will be able to load into your machine.
All files in RAR.
If you convert this files , can I load this files to ROM? or where ?
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
pablowlkp
All files in RAR.
If you convert this files , can I load this files to ROM? or where ?
Hello:
Becareful when uploading files into the Boot System.
Do not upload files if you already have them in the system.
The file that you probably erased was PMC-RB.000
Regards
AlexFanuc
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
First I will install the parameters files, and when the ladder is gone it will load ladder file.
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
alexfanuc
Hello:
Becareful when uploading files into the Boot System.
Do not upload files if you already have them in the system.
The file that you probably erased was PMC-RB.000
Regards
AlexFanuc
PMC-RB.000 is Ladder file?
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
pablowlkp
PMC-RB.000 is Ladder file?
That is correct. It should be in the system files.
regards
AlexFanuc
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
pablowlkp
PMC-RB.000 is Ladder file?
Yes, you have it?
1 Attachment(s)
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
pablowlkp
All files in RAR.
If you convert this files , can I load this files to ROM? or where ?
You have to copy it onto a Flash card and load it in that way. The file is here ready to load. It's called PMC-RC.000. The controller doesn't care what the file name is as long as it's a ladder file. You load it BOOT mode under System Data Load. (I added it to your rar file).
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
drdos
You have to copy it onto a Flash card and load it in that way. The file is here ready to load. It's called PMC-RC.000. The controller doesn't care what the file name is as long as it's a ladder file. You load it BOOT mode under System Data Load. (I added it to your rar file).
Thanks, I try it :)
3 Attachment(s)
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Hello
I load the PMC-RC file into the ROM on the machine.
I can see the LADDER in the machine :) yeah :)
I have a problem. I have two alarms:
-ER07 NO LADDER STEPS OPTION
-WN17 NO OPTION (LANGUAGE)
I think this problem is because I don't have PMC parameters loaded on my computer. How can I load these parameters to the machine from my memory card? I have four files from the factory (attached). What extension should the files have?
I'm having trouble loading files from my PC because I can't select EDIT mode on my computer.
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Loading system files and parameters should be done in MDI mode (default) and E-stop condition.
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
I didn't see any CNC Parameters among these files. Did you load these? The errors that you are getting are related to option parameters not set to support that ladder that you installed. 9900's parameters is where these are stored. ALL CNC parameters must be loaded first.
Re: STAMA MC 530 1995 FANUC 16M all parameter lost
Quote:
Originally Posted by
pablowlkp
Hello
I load the PMC-RC file into the ROM on the machine.
I can see the LADDER in the machine :) yeah :)
I have a problem. I have two alarms:
-ER07 NO LADDER STEPS OPTION
-WN17 NO OPTION (LANGUAGE)
I think this problem is because I don't have PMC parameters loaded on my computer. How can I load these parameters to the machine from my memory card? I have four files from the factory (attached). What extension should the files have?
I'm having trouble loading files from my PC because I can't select EDIT mode on my computer.
Hello:
I agree with DRDOS. You have not loaded option parameters.
Load CNC parameters and you will be able to see the ladder.
Regards
AlexFanuc