Problem with planar cut-in

Hello

I’ve got a problem with planar cut-in.
Every time I try to make it, an error occurs: 061603 cut-in form isn’t correctly defined. The chisel is defined with cutter 1 form 2 and cutter 2 form 3.
It seems to me that I made everything correctly, according to the instruction. But probably something isn’t right.
Could anybody help?

Regards, Jan


Example:
G18G0
G54
G75X1=0Z1=0
T5
G96S120LIMS=2000F0.12M4
G0X20Z5
CYCLE93( 50.00000, 50.00000, 10.00000, 6.00000, , , , , , , ,0.03000, 0.03000, 2.00000, ,6, )
G75X1=0Z1=0
M30

Hello Jan
It would be helpful to have a sketch. Your start point and the first values in the cycle don’t match up. But maybe I’ve got my wires crossed somewhere. Do you mean the cutter coat writing cutter form 2/3?

If you do, it can be the problem. The coat has to be 7 in case of planar cut-in, it should work with 2 D-numbers.

Greetings
Michael

Quote:

---

Hello Jan
It would be helpful to have a sketch. Your start point and the first values in the cycle don’t match up. But maybe I’ve got my wires crossed somewhere. Do you mean the cutter coat writing cutter form 2/3?

If you do, it can be the problem. The coat has to be 7 in case of planar cut-in, it should work with 2 D-numbers.

Greetings
Michael

---

Hello Michael
Thanks for your reply. Yes, I meant the cutter coat.
The problem has been solved. The mistake had been in the angle between the planar and the roll axis. It has to be 90° for planar cut-in and not 0.

Regards, Jan