EdgeCam - Prototrak SMX Post Toolchange

Hi, This is my first post and hopefully someone can help.

I have created a post from EdgeCam for a ProtoTrak Smx but I'm having problems with the tool change. I have 3 machining sequences in EdgeCam and requires 3 different tools, one for each sequence. The problem is that when imported into Prototrak as a ' .cam' file the tool numbers do not match up to the sequences created in EdgeCam.

The tools are in order 1,2,3 but the tools used in Prototrak are ordered in 2,3,1

Below is a copy of the output program (less comments) from EdgeCam Code Wizard. Everything else seems to work ok.

Regards,
Bill



G21 G90 G40

T1 M06
S1500
G0 X-2.304 Y-10.732
Z5.0

G1 Z-10.0 F100.0
G3 X-0.452 Y-9.968 I-0.942 J4.91 F200.0
G1 X0.377 Y-9.409
G3 X2.56 Y-7.359 I-7.959 J10.662
X5.167 Y-3.113 I-13.215 J11.037
X6.832 Y2.424 I-24.28 J10.32
G1 X6.379 Y2.725
G2 X0.0 Y15.181 I8.622 J12.277
G1 Y50.0
G2 X15.0 Y65.0 I15.0 J0.0
G1 X75.0
G2 X90.0 Y50.0 I0.0 J-15.0
G1 Y15.0
G2 X75.0 Y0.0 I-15.0 J0.0
G1 X15.0
G2 X7.674 Y1.911 I0.001 J15.002
G3 X5.182 Y2.611 I-2.552 J-4.3
G0 Z5.0

T2 M06
S1000
G0 X36.994 Y32.502
Z5.0

G3 X28.045 Z4.31 I-4.475 J0.0 K1.38 F400.0 M3
X36.948 Z3.623 I4.451 J0.0 K1.373
X28.091 Z2.94 I-4.429 J0.0 K1.366
X36.901 Z2.261 I4.405 J0.0 K1.359
X28.137 Z1.585 I-4.382 J0.0 K1.352
X36.856 Z0.912 I4.359 J0.0 K1.345
X28.182 Z0.243 I-4.337 J0.0 K1.338
X36.811 Z-0.422 I4.314 J0.0 K1.331
X28.227 Z-1.084 I-4.292 J0.0 K1.324
X36.766 Z-1.743 I4.27 J0.0 K1.317
X28.271 Z-2.398 I-4.247 J0.0 K1.31
X36.722 Z-3.05 I4.226 J0.0 K1.303
X28.315 Z-3.698 I-4.203 J0.0 K1.297
X36.678 Z-4.343 I4.182 J0.0 K1.29
X28.359 Z-4.984 I-4.159 J0.0 K1.283
X36.635 Z-5.623 I4.138 J0.0 K1.277
X28.402 Z-6.258 I-4.117 J0.0 K1.27
X36.592 Z-6.889 I4.095 J0.0 K1.263
X28.445 Z-7.518 I-4.074 J0.0 K1.257
X36.55 Z-8.143 I4.052 J0.0 K1.25
X28.487 Z-8.764 I-4.032 J0.0 K1.244
X36.508 Z-9.383 I4.01 J0.0 K1.237
X28.508 Z-10.0 I-4.0 J0.0 K1.234
G1 X28.517 Y32.223
X28.547 Y31.945
X28.595 Y31.67
G3 X36.469 Y33.058 I3.913 J0.832
G1 X36.42 Y33.333
G3 X28.508 Y32.502 I-3.912 J-0.831
G1 X28.581 Y27.813
X28.453 Y27.054
G3 X28.501 Y25.737 I8.313 J-0.353
G1 X28.651 Y25.095
X28.689 Y25.0
X37.92
X38.975 Y25.185
G3 X40.722 Y25.859 I-3.364 J11.332
G1 X41.516 Y26.356
X42.231 Y26.961
X42.86 Y27.655
X43.396 Y28.423
X43.838 Y29.249
X44.186 Y30.119
X44.44 Y31.021
X44.604 Y31.943
X44.678 Y32.877
X44.667 Y33.814
X44.573 Y34.746
G3 X43.194 Y38.726 I-11.054 J-1.602
X41.015 Y40.0 I-2.179 J-1.226
G1 X26.964
X26.142 Y39.869
X25.875 Y39.805
G3 X25.0 Y38.694 I0.268 J-1.111
G1 Y25.75
G3 X25.75 Y25.0 I0.75 J0.0
G1 X29.079
X37.92
X46.747
X47.597 Y25.186
X48.788 Y25.733
X49.717 Y26.362
X50.593 Y27.061
X51.341 Y27.897
X51.96 Y28.831
X52.449 Y29.84
X52.817 Y30.899
X53.069 Y31.992
X53.219 Y33.103
X53.271 Y34.223
G3 X52.934 Y37.564 I-16.009 J0.069
G1 X52.812 Y38.076
G3 X50.38 Y40.0 I-2.432 J-0.576
G1 X41.015
G3 X39.007 Y38.989 I0.0 J-2.5
G0 Z5.0
X44.729 Y26.024
G1 Z-10.0 F100.0
G3 X46.747 Y25.0 I2.018 J1.476 F400.0
G1 X54.581
X55.438 Y25.094
X56.652 Y25.507
X57.615 Y26.026
X58.534 Y26.619
X59.343 Y27.356
X60.034 Y28.205
X60.608 Y29.136
X61.068 Y30.129
X61.424 Y31.163
X61.681 Y32.226
X61.854 Y33.307
G3 X61.801 Y37.874 I-18.274 J2.069
X59.329 Y40.0 I-2.472 J-0.374
G1 X50.38
G3 X48.368 Y38.984 I0.0 J-2.5
G0 Z5.0
X52.563 Y26.024
G1 Z-10.0 F100.0
G3 X54.581 Y25.0 I2.018 J1.476 F400.0
G1 X64.25
G3 X65.0 Y25.75 I0.0 J0.75
G1 Y39.25
G3 X64.25 Y40.0 I-0.75 J0.0
G1 X59.329
G3 X57.314 Y38.98 I0.0 J-2.5
G0 Z5.0
X28.968 Y38.993
G1 Z-10.0 F100.0
G3 X26.964 Y40.0 I-2.004 J-1.493 F400.0
G1 X25.75
G3 X25.0 Y39.25 I0.0 J-0.75
G1 Y38.694
G3 X25.335 Y37.444 I2.5 J0.0
G0 Z5.0

T3 M06
S1000
G0 X45.0 Y44.93
Z5.0

Z3.94
G1 Z-1.06 F50.0
X25.0 F200.0
G3 X20.07 Y40.0 I0.0 J-4.93 F150.0
G1 Y25.0 F200.0
G3 X25.0 Y20.07 I4.93 J0.0 F150.0
G1 X65.0 F200.0
G3 X69.93 Y25.0 I0.0 J4.93 F150.0
G1 Y40.0 F200.0
G3 X65.0 Y44.93 I-4.93 J0.0 F150.0
G1 X45.0 F200.0
G0 Z5.0
M30
%