Digital Machinist CNC Workshop
The Digital Machinist CNC Workshop will be held June 22-25 at Washtenaw Community College in Ann Arbor, MI. We will have a number of manufactures in attendance providing demos and instruction and have a full schedule of seminars to cover all four days. If you are interested in learning more about the event, please visit our information forum at CNC Workshop Information
In the Digital Machinist CNC Workshop forum, you will find lists of seminars, vendor lists, lodging options, as well as registration and payment methods. Information and registration can also be handled by calling Village Press at 800-447-7367.
June is coming up fast, so make your plans now! For those attending the NAMES show in Southgate, MI on April 24 and 25, I will be there to answer any questions you may have.
Thanks, we hope to see you in June!
George Bulliss
Editor, Village Press Publications
Digital Machinist
The Home Shop Machinist
Machinist’s Workshop
Digital Machinist CNC Workshop – Seminar Schedule
Listed below is the schedule for seminars and events at the Digital Machinist CNC Workshop. As can be imagined, matching the needs and wants of the speakers and attendees to the availability of classrooms resulted in a few compromises. Because of this, there will likely be some future tweaking of the schedule, but the majority of it should remain unchanged.
I have left some gaps in the schedule and also have intentionally scheduled Friday somewhat light. Several speakers have mentioned their willingness to do a follow up seminar should there be interest and I wanted to leave some room at the end of the week to allow a rerun of the popular seminars.
There are also a few things that are not scheduled at this point. These include, “Basic Multi-tool Operation in Mach3” and “Reverse Engineering with a CNC Scanner,” both presented by Tormach. Roland Friestad will be on hand to help with the Workshop and will be doing several seminars as well. Brian Barker of Newfangled Solutions (Artsoft and Mach) is planning on giving a few talks as well. Rick Chownyk plans to do a few casting demonstrations (Cheap and Free Casting and Lost Foam Casting), weather permitting.
This list does not include the demonstrations the vendors will be doing throughout the week; there should be plenty to see and do all four days!
From 8-9 each day we will have coffee available and the majority of vendors should be on hand. Lunch will be from 12-2 each day, though some seminars run into this time. Tuesday morning from 9-10 will be an orientation and question and answer session. The seminars and times for the week are:
Tuesday
EMC Lab – from 10-12, by Ray Henry
Cheap and Easy CNC – 10-12, presented by Rick Chownyk
Adventures in Home Shop CNC – 10-12, by Ron Ginger
Hands-on CAM Workshop – 2-4, by Tormach
Spindle, Servo, and Stepper Motors – 2-4, by Steve Stallings of PMDX
Wiring a Low Cost Electrical Enclosure – 2-3, by Bob Campbell
An Overview of Pico Systems CNC Products – 4-5, by Jon Elson of Pico Systems
Wednesday
Getting Started in CNC – 9-10, by Tony McKenzie of Vetric
Machine Tool Manufacturing in China – 9-11, by Greg Jackson of Tormach
EMC Lab – 10-12, by Ray Henry
Cheap and Easy CNC – 10-12, by Rick Chownyk
Writing Mach Wizards – 1:30-5, by Ron Ginger
Grounding, Shielding, and Isolation – Safety and Noise Issues – 2-4, by Steve Stallings of PMDX
How Things Move – 3-4, by Rick Chownyk
Servo Tuning on EMC2 – 4-5, by Jon Elson of Pico Systems
Thursday
What Makes a Machine “CNC Ready” – 9-10, by Fred Smith of IMService
EMC Lab –10-12, by Ray Henry
Cheap and Easy CNC – 10-12, by Rick Chownyk
CNC for Model Making – 2-3, by Tony McKenzie of Vetric
Emergency Stop Circuits, Mains Disconnect and Other Considerations – 2-4, by Steve Stallings of PMDX
CAD and CAM Alternatives; From Free to “You Probably Can’t Afford It” – 3-4, by Fred Smith of IMService
The Ins and Outs of Brushless Motors – 4-5, by Jon Elson of Pico Systems
Friday
My Quest for an Inexpensive Desktop Tool Changer – 9-10, by Fred Smith of IMService
EMC Lab –10-12, by Ray Henry
Cheap and Easy CNC – 10-12, by Rick Chownyk
Decorative Design and CNC Machining – 2-3, by Tony McKenzie of Vetric
Other seminars to suit demand.
BBQ starts at 5
More information can be found at:
CNC Workshop Information
George
Photos link and welcome to newcomers
For donnaj867 and other newcomers, no worries, newcomers were warmly welcomed. I was pleasantly surprised to see so many newcomers that ranged from those just building or converting their first CNC to some who haven't started. Rick's intro classes were a big hit.
Even more surprising to me was the number of attendees with CNC woodworking routers or even small engravers. I feared I would be the only woodworker but must have met at least 20 and am sure more were there. I guess the change in venue has made it more accessible to a wider audience.
Here's a link to some photos of the event. I'll have to reorganize them later as they seem to have uploaded in a mixed up state.
http://groups.yahoo.com/group/CNCWOR...18914/pic/list
I think you have to join the group to see photos but that's free. If anyone would prefer me to upload here, just let me know I can do that tomorrow.
Gordon