EZCAD2 for Windows 10 OS fiber laser engraving machine
I purchased a fiber laser engraving machine from china a few months ago. EZCAD 2 kept crashing on the Windows 7 computer they sent me. Finally im guessing some of the components in the computer they sent with the machine were less than adequate and the computer took a turn. I have since purchased a laptop for use on the machine only. I was hoping someone could point me in the right direction getting software to work on windows 10 OS so that i have a reliable computer to work off of. Very new to fiber laser but the possibilities are endless and am willing to handle the learning curve. I just need a little help here and there. Thanks in advance!
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Hello,What's your version of EZCAD software?We have a software and can send it to you.
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
The EZCAD version 2.14.9 is compatible with Win10 64 bits.Do you have the installation file?I have but I don't know how to upload the file this page.
1 Attachment(s)
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Here is a video to install EZCAD2 to computer with Windows 10 OS.
https://youtu.be/3_PnlOZsh7A
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
i need the drive of ezcad for window 10 - 64 bit please
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
OK.Here is a file which include drive and software EZCAD 2.14.10.And here is a video to show how to uninstall the drive.
https://youtu.be/R1ohAMcFWlw
Sorry the file is too large and I was thinking it was uploaded.You can send a personal message to me.
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
hi,I tried to acces your link but is missing I can't find it can you please send me the link because I have win 10 and it's not working :( and it gets so frustrating when whenever I try it showes "no dongle" so If you could help me it will be great.Thank you
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
Opticlaser
Hi, i have the same problem with Ezcad on Windows 10 64-bit.
I tried versions 2.9.9, 2.14.9 and 2.14.10. I installed drivers from your links and all the time doesn't works.
Do you have any solution?
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
Opticlaser
Here is the software.
Hi i just recently purchased a 30W Fibre Laser marking machine, and i installed the software Ezcad2.14.9 software but it still says can not find dongle and i can only use in demo mode??
Can anyone help me?
Cheers
Tony
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
I test the link and I can download it without problem.If you need the driver or software,I can send you privately too.
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
Opticlaser
I test the link and I can download it without problem.If you need the driver or software,I can send you privately too.
same problem here in Poland with WIN10
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
i've installed ubs driver but still shows info about missing dong
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Can you download the driver and software?
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
hello
yes, i can and i did it.
i updated driver as shown on YT movie but already have te same driver.
Unfortunately software still says about missing dong
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
I have Ezcad2.9.9 and It was working fine with windows 7. and Install Windows 10 64bit version and when software opening it's saying "Can not find dongle.demo state".
when i try to engrave it's saying "Current LMC Board is not for fiber Laser"
And parameter setting F3 hardware info showing "invalid board"
but i tried to work with windows 7 again (old hard drive) it was working file.I think problem with windows 10 64bit. installation issue.
Does anyone have Ezcad2.9.9 software and drivers for windows 10 64bit?
or any other solution for it?
Thank you
from Sri Lanka
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine