Cnc4pc c62 Board help please
Hello
I use c62 board and I am very happy with that.
my question is
all my inputs set to be activate with 24 volt .
all jumpers set for that and when I connect the
input to 24 volt green led in mach turn on.
my problem is that
I got a tool setter sensor and it works with 5 volt.
I can use the output of c62 for 5 volt.
The sensor will activate when it sink to common I guess it has to connect to
zero volt.
how I have to change the input 5 port 1 only to
work with that. I want all other inputs still activate with
+24 volt.
which jumpers I have to change ?
how can I do that ?
please Help.
Re: Cnc4pc c62 Board help please
Still waiting .
Any help please ?
Re: Cnc4pc c62 Board help please
Yes, all I/Os have jumpers to select the operating voltage for each pin. This is the same for inputs or outputs.
Let me know if it is clear.
Arturo Duncan
http://cnc4pc.com
Re: Cnc4pc c62 Board help please
Original message removed. Sorry for jumping in with incorrect advice Arturod, I didn't realize each input pin had it's own jumper! Makes it simple, like you said he just needs to set the jumper for the sensor input pin to 5v.
Re: Cnc4pc c62 Board help please
Yes, you can. You do have a jumper to set the common to be used for each group of I/Os, and there are independent jumpers for each pin to select if that pin would use +5vdc or +12/24vdc logic. I know the way we set it up may be a little unconventional, but it allows wiring I/Os without having to use external pull-up/down or in-line resistors. So you can wire common industrial sensors, relays or other devices using TTL signals.
Arturo Duncan
http://cnc4pc.com