i have a 2.5 insert endmill that i want to use in a BA=75
how do i touch off tool?
Printable View
i have a 2.5 insert endmill that i want to use in a BA=75
how do i touch off tool?
How old is the Multus?Quote:
Originally Posted by okumamultus
The one im running is an Multus B250II with OSP-P300SA-H control on it.
I just touch of in basic position (TD=XXXXXX) and use G52
BR Masterblaster
hy 8laster :) i guess is nice if you have experience with multus & LT's; so far, i have never worked on such machines ...Quote:
I just touch of in basic position (TD=XXXXXX) and use G52
it seems that he uses G52, like it is shown in his other thread, but i don't know what is missing; all the best :)
hy, my 1st idea would be to let loose the B axis, and tilt the machine using a forklift ... should work :)Quote:
i have a 2.5 insert endmill that i want to use in a BA=75
how do i touch off tool?
i also looked inside the manuals, trying to find some special functions, that maybe will help you, but unfortunately i can't be specific; pls find attached infos about :
... coordinate system selection function
... tool center point function / tool attitude command
... the 3d coordinate conversion function
... tool posture compensation function / kindly :)