-
Hello everybody
I am working with Pro/NC Wildfire 4 for 4 months now. Even though I have no experience with any CAM systems I cope quite well with Pro/NC.
However I have a little problem now:
I want to mill a thread. Generally that’s no problem but I really need a radius correction with this NC series. The help in Pro/E did not help me out.
I appreciate any suggestions!
-
Hello
If I remember correctly then you can change from CUTCOM to LEFT in the parameters.
I think, you can select on the last rider normal approach/departure pathin the dialog where you can select the axis..
Finished. How you should have at least the radius correction in the CL_DATA.
What you PP does with it is a different story..