Daewoo ACE-V30 operators manual ??

Hi Guys .
I know this is a long shot but you never know .
I just got myself a used Daewoo ACE-V30 machining centre with a Fanuc OM control .
Its a 1990 model so yes fairly old .
I didnt get any manuals with the machine though .
So im wondering if anyone has manuals for the machine ?
It has a table that rotates 180 degrees so im after the M codes etc etc that would control the table and the door opening and closing .
Parameters are there so ill punch them to the pc sometime soon.

Any manuals or wiring diagrams would be great .

Thanks

If you can provide the Serial Number of the machine, from the placard on the electrical door (with that age machine it was either outside, or inside)

Doosan has most manuals still available, for Doosan, Daewoo, and Mechatech machines.

Most of them are less than 100 dollars (US) each...(around 300 for the entire set that shipped with the machine. (Safety, Instruction, Operation, Parts, and Electrical)

Note: These are not FANUC Manuals. (You would get those from Fanuc)

Hi dhardt .
Attachment 367884

Attached is a picture of the name plate etc etc .
Our local Daewoo/Doosan agent has told me that there isnt anything available for this machine .
Serial number : 410091
Year : 1990 .
Im familiar with the fanuc side of the machine so that wont be too much of an issue .

Thanks

Checking.
Likely, answer by tomorrow..

Thank you . Much appreciated .

My apologies for getting your hopes up...
Per our parts department: "It is too old, factory only have 2 manuals in CSTIP, Electrical and parts and they aren’t even sure they would match this machine s/n."

Sorry, normally we have them...some items fall through the cracks, unfortunately.

Thanks for trying anyway .
I appreciate it !!

Quote:

---

Originally Posted by Shottie_gp

Hi Guys .
I know this is a long shot but you never know .
I just got myself a used Daewoo ACE-V30 machining centre with a Fanuc OM control .
Its a 1990 model so yes fairly old .
I didnt get any manuals with the machine though .
So im wondering if anyone has manuals for the machine ?
It has a table that rotates 180 degrees so im after the M codes etc etc that would control the table and the door opening and closing .
Parameters are there so ill punch them to the pc sometime soon.

Any manuals or wiring diagrams would be great .

Thanks

---

Hi; still looking for the manual?, is big, so please let me know what part you are interested in.