1 Attachment(s)
6040 cnc PRT-E1500W vfd settings.
Recently I bought a 6040 4 axis cnc router off of eBay and the instructions didnt have the right settings for the vfd that came with it.What should I do. I attached the manual to the thread THANKS.
Re: 6040 cnc PRT-E1500W vfd settings.
koolkleptokidd
A lot have been having this same problem, you need the manual for the VFD drive then you will be able to set the VFD
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
koolkleptokidd
Do you know how i can find it? Ive looked all over the Internet and cant find anything on it.
Did you check the whole contents of the DVD? If not there you should ask the seller. If you can't get the manual from the seller you should give negative feedback and demand some refund or send it back. It is horrible that those people keep selling these products without even a crappy simple manual.
Re: 6040 cnc PRT-E1500W vfd settings.
yeah, ive checked it multiple times and cant find anything, I attached the manual if you want to read it.
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
koolkleptokidd
Do you know how i can find it? Ive looked all over the Internet and cant find anything on it.
I do have the VFD manual for this VFD, and I'm translating it now, so once I have it done, I will post the Parameter Settings, this will take me some time to complete, as some of it does not translate that well
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
koolkleptokidd
yeah, ive checked it multiple times and cant find anything, I attached the manual if you want to read it.
I have already checked what you posted, but that's not the VFD manual, it is just a bunch of pointless images with very little information. I mean the REAL manual. Why not ask the seller? Did you try that as well?
Re: 6040 cnc PRT-E1500W vfd settings.
koolkleptokidd
This will get you started, there will be other adjustments needed, what size spindle motor do you have 800w or 1.5Kw
D000=400
D001=1 ( May be D000=0 by Default this will lock any Parameter Change )
D002=400
D003=400
D004=220
D009=400
D010=100
D011=10 ( Default=10 Adjustable Acceleration )
D012=10 ( Default=10 Adjustable Deceleration )
D031=0 ( Default=0 For Keypad use (1 ) for Remote Control )
(D031 May need to be set to 4 D031=4 Depending how your Control is being used)
D032=0 (Default May need to be set to 1 D032=1 Depending how your control is being used )
D033=0 ( For Keypad Stop ( 1 ) If Remote Control is being used )
D036=1
Re: 6040 cnc PRT-E1500W vfd settings.
I have the 1500w spindle motor.
Mactec54
Re: 6040 cnc PRT-E1500W vfd settings.
i've tried asking them before but all they do is keep sending the same manual to me.
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
koolkleptokidd
I have the 1500w spindle motor.
Mactec54
Try the setting I have posted, they should get you going, we may have to adjust some others as well, the D001=1 has to be set first before you set any other parameters
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
koolkleptokidd
i've tried asking them before but all they do is keep sending the same manual to me.
They make this VFD, and don't have a very good manual, if you had it you would not be able to understand it anyway, I will work with you to get it running
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
mactec54
They make this VFD, and don't have a very good manual, if you had it you would not be able to understand it anyway, I will work with you to get it running
Ive tried the settings and I cant get it to work, is there a difference between if it has the 800w of 1.5kw spindle?
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
koolkleptokidd
Ive tried the settings and I cant get it to work, is there a difference between if it has the 800w of 1.5kw spindle?
No only the amp settings which I never found, now if you have the main Parameter settings in place, then there will be some control things we can try, Does the VFD power up ok can you do some photos, have you opened the cabinet
What setting did you use in D031
D032
D033
Try them all at 0
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
mactec54
No only the amp settings which I never found, now if you have the main Parameter settings in place, then there will be some control things we can try, Does the VFD power up ok can you do some photos, have you opened the cabinet
What setting did you use in D031
D032
D033
Try them all at 0
ive tried them all and it turns on the spindle but it only stays at 144.6
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
koolkleptokidd
ive tried them all and it turns on the spindle but it only stays at 144.6
Don't run it at that speed for very long only just to try the speed, this could damage the spindle
Do you have all the Parameters I posted these must all be in place before running
Have you switched the Spindle Mode Switch set to Manual on the front of the control Panel
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
mactec54
Don't run it at that speed for very long only just to try the speed, this could damage the spindle
Do you have all the Parameters I posted these must all be in place before running
Have you switched the Spindle Mode Switch set to Manual on the front of the control Panel
I did put all the settings in place and I changed it to manual.
Re: 6040 cnc PRT-E1500W vfd settings.
Quote:
Originally Posted by
koolkleptokidd
I did put all the settings in place and I changed it to manual.
Another 2 to try just do 1 at a time and try it, it could be just one Parameter some where I will keep looking there may be something I missed, the manual I have is in Chinese and it has not translated very well
Change D036=0 to Zero also
D020=400
D040=100
Is your power supply 120v or 240v