4 axis display problem

I`m new to TNG so be kind with me.
I have a problem with displayed toolpath in 4 axis.
When work coordinate is the same as machine display is ok.
Attachment 460464
When work coordinate is offset from machine coordinate it distort the toolpath like this:
Attachment 460466
In the old softare with offset didn`t had this problem:
Attachment 460468
The toolpath work without problems only it is displayed incorrect.
If disable rotary axis in display 3d toolpath display is correct and not distorted, but not 3D.
I hope I explained well the problem, if not I`m here for any clarifications.

I really need an answer and solution because in 4 axis toolpaths, things get worse.
Here is an example of 4 axis toolpath displayed on only 3 axis on TNG.
Attachment 460518

Workaround for this is for now to copy a profile with machine in simulation and load toolpath in machine position, aka work position to machine position to see toolpath displayed correctly, then I can load toolpath in real profile for machining.
Here it is displayed correctly.
Attachment 460524
I hope this is a temporary solution, and it will be fixed soon.

Send me these g-codes. I assume profile is the same.

Problem solved thanks to PlanetCNC support.