-
Circle problems
hello everyone. I have a problem with machining circles. everything seems good if I just make one pass, but if I want to go deeper than one cut then as the cutter descends into the material the Y axis moves in a minus direction. It has to be something to do with settings I feel sure because it moves the same amount over with each cut down but I can not see what the problem is, can anyone help me out please?
thank you
-
Re: Circle problems
You provided no background info. What software are you using, what kind of material are you cutting, what kind of cutter, pictures, videos, etc.
Russ
-
Also machine type,control type, sample of program in machine would be of help.
Dave
-
Re: Circle problems
sorry guys I did try to add before but doesn`t seem to of been posted,I tried to add as an answer . I have a small 3018 machine that I changed over from grbl to mach3 the cut a circle wizard which comes with mach3 was how I was trying to cut the circle. I have closed all cv settings and I am running the motors under tuning the same acc and vol. hop this helps
-
Re: Circle problems
hello hope this pic tells the story of the problems I am experiencing
-
Re: Circle problems
I have tried to post a pic but is not working ? anyone advise please?
thanks haz
-
1 Attachment(s)
Re: Circle problems
https://www.cnczone.com/forums/attac...d=434622&stc=1this is a picture of my problem after running cut a circle to a depth of .8mm .1mm per cut can anyone please assist?
thank you Haz
-
Re: Circle problems
This on the surface appears to be the Steps per Unit are set wrong on the Yaxis. Post your gcode you are running to do these tests. My friend has this same machine and it still has the GRBL controller but it cuts circles fine.
Russ
-
Re: Circle problems
Looks like it's losing steps in the Y axis. Do you have backlash comp enabled?
-
Re: Circle problems
Clearly Gerry could also be correct. Also check coupling tightness on that axis. My friend has same machine and his coupling came loose a day after he started using it.
Russ
-
Re: Circle problems
thank you Russ for your input. I just reloaded mach3 066 version and all is good, think I need to download some files to keep win10 stable with usb mach3 running properly with the plugin bl-usbmach v2.2 so need to look into that . have a good day