Error Solidcam " Gap minimum value is not in range ( muse be between 1e-06 and 1 )

Hello

I want to make a contour
but i have an error message
see image below

https://ibb.co/r2KZfN9

unfortunately I looked for a solution


I have also been in the options and I have this

https://ibb.co/Tqw3P0q

does that sound correct to you?

thank you for helping me please

This is a setting in your SolidCAM Settings. You can correct the value in the area highlighted in the attached screen grab. https://www.cnczone.com/forums/attac...d=453856&stc=1 This will correct this error from coming up in new files. In any of your old files that reopen you will have to correct your Part Settings or correct the value in your Chain selection window.