Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
This week I will order the electronics. I spent the weekend selling my cnc x2. Now I have the funds. But now need to get mach 3 and a computer : (
What do you guys think of mach 4? Think I should get that over mach3? I not good with mach3 yet so I was thinking I might as well get the latest but fear lack of support due to it being new.
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
UPDATE: I purchased this so far.
Thank you for purchasing with Automation Technology Inc, any items to be shipped will be processed as soon as possible, any items that can be downloaded can be downloaded using the links on this page.All prices include tax and postage and packaging where applicable.
You ordered these items:
- 1 3-Axis DSP Based Digital Stepper Driver Max 60 VDC / 6.0A, MX3660 $264.95
- 2 NEMA23 570oz/in 5A 3/8” Dual Shaft Stepper Motor (KL23H2100-50-4B) $91.90
- 1 NEMA34 Stepper Motor – 906 oz in 6.1A Single Shaft (KL34H295-43-8A) $89.00
- 1 Unregulated Linear 625W/48VDC/13A Toroidal PSU (KL-4813) $139.00
- 1 Cable Drag Chain Wire Carrier (C: Cable drag chain wire carrier 10*20mm R28 1000mm (40") $11.40) $11.40
- 1 E-stop Switch $9.95
- 20 4 conductor 18GA Shielded Motor wires $19.00
- 8 Motor cable connector $31.92
- 1 6 feet Mach3 Parallel Cable DB25M to DB25M $8.95
- 1 110 VAC Box Fan $11.95
Getting closer!
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
Nice progress. From the posts I've read on Boss's thread, mach4 isn't finished or still has some kinks to be worked out. Mach3 should be fine for a while longer and it's cheaper too.
Sent from my XT907 using Tapatalk
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
Quote:
Originally Posted by
Alax7
Nice progress. From the posts I've read on Boss's thread, mach4 isn't finished or still has some kinks to be worked out. Mach3 should be fine for a while longer and it's cheaper too.
Sent from my XT907 using Tapatalk
Btw, Mach 3 isnt finished yet either. Or any software for that matter. I am sure you meant Hoss, but he is the Boss ;-)
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
Yeah, software can always be upgrade huh. Oh and yeah I meant hoss, auto correct on my phone strikes again. Well what I meant was more on the lines of mach4 is not where mach3 is at and it is still under development to catch up to it so mach3 would probably be your best choice right now. Not sure exactly what all is missing, hoss has some good info in his thread
Sent from my XT907 using Tapatalk
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
Thanks guys,
I finally figured out that my DRO on my bridgeport was off by .015'' every inch of travel. It was a dumb error on my part when setting the resolution. This should help me make the parts a bit faster from now forward.
Anybody tried these noga holders? I am thinking of buying 1 or 2. I am bidding on a few on ebay. But they are about the same on there used as a new one.
NOGA Dial Gage Holder Magnetic Base - Model: DG61003 AUTO POWER: On/off mag.base HOLDING POWER: 176 Ibs Regular Duty: Tools Products: Amazon.com: Industrial & Scientific
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
I have this one from Shars.
It's a mini, so pretty small, but so is my little indicator. I have the older style for my bigger indicators and had planned on getting this type for it too. They work great. Much easier than the older rod style.
SHARS 3D Mini Universal Magnetic Base Holder for Dial Test Indicator New | eBay
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
Quote:
Originally Posted by
deuce217
Thanks for your purchase. If you have any question, pls contact us at [email protected]
if the DB25 cable pin is bent, it does not working, let us know, we will send you a new one
Here is the specification for the 8 wires motor. You can wire as bipolar parallel
NEMA34 Stepper Motor ? 906 oz in 6.1A Single Shaft (KL34H295-43-8A) | Automation Technology Inc
http://www.automationtechnologiesinc...H295-43-8A.pdf
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
Quote:
Originally Posted by
LeeWay
I think I have one similar to the shars. I am looking forward to the Noga. I bought 1 tonight. I will do a review when I get it.
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
Automation tech. Thanks for the quick reply to my email on the cable chain. I think the pins will straighten right out. Take care and thanks for the concern for your products quality. I will wire as you suggest.
Quote:
Originally Posted by
automationtechinc
UPDATE VIDEO: MACHINING THE HEAD SPACER FINALLY DOING THE BOLT HOLES using my cheap ebay DRO (SINPO)
https://www.youtube.com/watch?v=JWQ2auEiTFs
Re: Not Just Another G0704 Build (not in a good way) YOUTUBE VIDEOS INSIDE
Guys,
Here is tonights operation. I completed the double bearing block for the Y axis. This was a fun one to do. I had issues with some chatter when do the boring ops, but got it minimized with a different (ironically cheaper boring head). Thanks for watching/ reading. I really enjoy this forum. I dont write much on people's threads because I am following the old "two ears and one mouth rule".
https://www.youtube.com/watch?v=rqiOjyKm5xc
How to change into back gear on a bridgeport for beginners.
https://www.youtube.com/watch?v=YiCSKQHzxmw