we have the follwing alarm,
alarm # 1013 TR.. NOT BRAKE.
We can't find it in any of our manuals. Could someone advise us on this. Thanks.
Printable View
we have the follwing alarm,
alarm # 1013 TR.. NOT BRAKE.
We can't find it in any of our manuals. Could someone advise us on this. Thanks.
this alarm machine specific. you should look into ladder and look for answer there.
I thank you for your reply. Now i just found out that you just can't go to the para/dnos page and page to the ladder diagram. I was told that i had to set a parameter to activate taccess to the ladder. is this really valid info. They said they couldn't remember which parameter. Could you help with this?. Thanks.
parameter 60#2 dynamic ladder display
if you have paper copy of ladder you may check line where G119.0 is to be activated
Thanks, we have a small manual marked PMC. Whether it is for this machine i will have to check. this machine was bought, supposedly in working condion. But, i haven´t been able to do much with it yet. i guess my priority will be to try and get the turret to jog without getting alarms,
1013 TR. BRAKE, which i know is turret brake, thanks to your help.
1014 PLS. TURRET CW, comes up when i jog turret and it stops at pos. "supposedly".
1011 TURRET NOT RDY.
I am trying to clear the turret problem first before going on to other faults.
I really appreciate your help. regards.
Hello,
We lost all parameters for the same
LTC-20P Fanuc 0TF
Please help, share or sell NC parameters
and diagnostics (PMC parameters), your
call
My email address
[email protected]
Thank you
Jolulank
Quote:
Originally Posted by barnesven
My machine leadwell LTC 20P O-T series lose the parameter
After key in the parameter, my spindle speed can't reading display show the reading is 1 or 2 only whatever i comman m3 s50 or s500 or s1000 also reading 1 or 2 but spindle chuck is got turn