drilling cycle for acramatic 2100
Im use to fanuc controls and I'm having problems trying to spot, drill and tap on my cincinnati 750 with acramatic 2100 controls.
I have 138 holes per part and I want to spot drill .05 deep then peck drill down .6 with a .110 drill. I then need to tap these holes with a m3x.5 roll tap dwon about .4. Can anyone provide the g-code for it.
Re: drilling cycle for acramatic 2100
Quote:
Originally Posted by
John_B
Katsbobo,
The Mastercam post I use posts the following (using just three points - you can modify for yours), and I've almost never needed to manually edit any code generated from this post file. If you have Mastercam 9 or X, let me know & I'll send you the post file for your machine (send me a private message with your e-mail).
Hope this helps. You didn't mention any peck for the centerdrill, but I did add the peck for the .110 drill, and you may check the feedrate for the tap - I did a quick calculation. Also, I didn't use the rigid tap code (G84.1) because I don't know how well your machine works with that - mine does great.
Regards,
John
>>
:G90 G70 G40 G94
(MSG, PROGRAM NAME -A2100)
(MSG, DATE 08-24-08)
(MSG, TOOL 1 - .1250 CENTERDRILL)
(MSG, TOOL 2 - .1100 DRILL)
(MSG, TOOL 3 - M3X.5 TAP)
:T1M6
N100M26
N102G0G90H01X0.Y0.S1500M3M08
N104M11
N106A0.
N108M10
N110Z.1
N112G81Z-.15R.1W0.F.75
N114X.5W0.
N116X1.W0.
N118G80
N120M9
N122M26
N124M01
:T2M6
N126G0G90H01X1.Y0.S1736M3M08
N128M11
N130A0.
N132M10
N134Z.1
N136G83J13Z-.7R.1K.0500W0.F3.472
N138X.5W0.
N140X0.W0.
N142G80
N144M9
N146M26
N148M01
:T3M6
N150G0G90H01X0.Y0.S0300M3M08
N152M11
N154A0.
N156M10
N158Z.1
N160G84Z-.5R.1W0.F66.319
N162X.5W0.
N164X1.W0.
N166G80
N168M9
N170M26
N172M02
>>
Hi
I have mastercam X and post for cincinnati lathe control acramatic 2100 . but my post no is good for drill toolpatch.
you have post for acramatic 2100 of a cincinnati lathe??
thanks
Re: drilling cycle for acramatic 2100
No, don't have one for lathe. I don't have the mill anymore either. 8 years later, so lots of things have changed.
Sent from my SM-G920V using Tapatalk