He guys.
I'm wounding if it is possible to get my machine to reset c-axes cordinat when disengaging it.
Today I have to rewind it to zero before disengage which can be quite time consuming.
It's a lathe controlled by fanuc 18i
Printable View
He guys.
I'm wounding if it is possible to get my machine to reset c-axes cordinat when disengaging it.
Today I have to rewind it to zero before disengage which can be quite time consuming.
It's a lathe controlled by fanuc 18i
On my samsung SL-65MC with fanuc 0i I will program a G28 H0; M5 that way it will zero out before it disengaging. I like having a zero in C on the screen when I'm not using C axis
Is C axis the spindle or a real servo?
G28 h0 did the trick. [emoji106]
Sendt fra min ANE-LX1 med Tapatalk