ISEL Software

Hello all,

I have an old ISEL GFV machine, with servo UPMV 4/12 controller and UVE 8012 power stages, with old software for MS-DOS, Remote over ISELDRV.EXE.

Does anyone have the Windows version of Remote for UPMV 4/12? ISEL does not provide it anymore, I asked them, and tried current version of Remote: does not have UPMV 4/12 anymore.

Thank you,
All the best,
Valentin

Maybe it's good that you contact the following web site:
https://www.isel.com/de/produkte/sof...ml?___store=de

Of course I've been there and wrote them and also spoke by phone: replies were constant "we don't offer software for that controller, because it is too old. Throw it away and buy new." I don't know what this means in money, but I would not be surprised that only the controller is more expensive than what I can get for my whole 350 kg machine.

Those conversations with them I had about 6 years ago.

Did U try galaad software?
In my opinion it is much more user friendly than isels.

According to this, Galaad also does not support UPMV 4/12.

https://www.cnczone.com/forums/gener...-software.html

Thanks for the idea, though!

Quote:

---

Originally Posted by valentin777

Hello all,

I have an old ISEL GFV machine, with servo UPMV 4/12 controller and UVE 8012 power stages, with old software for MS-DOS, Remote over ISELDRV.EXE.

Does anyone have the Windows version of Remote for UPMV 4/12? ISEL does not provide it anymore, I asked them, and tried current version of Remote: does not have UPMV 4/12 anymore.

Thank you,
All the best,
Valentin

---

Here you may find what you are looking for:
https://www.isel.com/en/support-down...germanyag.html

Hi,

Current versions of Remote DO NOT contain drivers for UPMV 4/12. I have a Remote setup kit downloaded from their site, it misses MCTL_UPMV4.DLL (motion control) and a few more (spindle control, IO, etc) . I also wrote/spoke with them: same result.

This guy from Croatia was also not finding them in 2015, same answer from ISEL: "we don't support such old controller".

https://www.cnczone.com/forums/techn...-software.html

Thank you,
Valentin

BUMP.
I have the same issue.Any help would be greatly appreciated.

I have a really old version of remote that does what you are asking for. It seems to be stuck in german though.

Quote:

---

Originally Posted by bp_me

I have a really old version of remote that does what you are asking for. It seems to be stuck in german though.

---

Is that a DOS or windows version? If it’s Windows It would be very helpful

Quote:

---

Originally Posted by rc-worcs

Is that a DOS or windows version? If it’s Windows It would be very helpful

---

Windows. It even seems happy to run on Win10. Though I'm currently waiting on cables to come to verify that.

Hello Brendan,

I'm very interested in your Windows version of Remote, that can drive UPMV 4/12. Please: does it contain MCTL_UPMV4.DLL? Or some mctl____.vxd?

Best regards,
Valentin.

Quote:

---

Originally Posted by valentin777

Hello Brendan,

I'm very interested in your Windows version of Remote, that can drive UPMV 4/12. Please: does it contain MCTL_UPMV4.DLL? Or some mctl____.vxd?

Best regards,
Valentin.

---

I'm unsure what's in the cab files. It gives the option for the upmv 4/12 during the installation. I'm using an icm4 machine myself.

Hi Brendan,

Could you please PrivateMessage me? or email valentin777 at gmx.net?

Best regards,
Valentin

Hi Brendan, valentin777,

Can I also have that software please? Stuck in exactly same problem :D

Thank you very much

Quote:

---

Originally Posted by crisiacuf

Hi Brendan, valentin777,

Can I also have that software please? Stuck in exactly same problem :D we become what we behold

Thank you very much

---

Me too