2 Attachment(s)
SF Model w/ Updated Pendant Style Controller, lost program
Recently purchased an SF model that has the new controller installed on it (pic attached). I'm new to Multicam, been using a GRBL machine. I managed to get my laptop connected to the machine and was messing around in MotionMechanics. I was trying to locate the file directory for storing files. Long story short I went to File -> Store File and uploaded a simple G-code file where the program should be. Big mistake, gut hurts thinking about it. Can anyone help w/ getting a program installed back on the controller? I would really appreciate any help you can provide. Thanks.
Re: SF Model w/ Updated Pendant Style Controller, lost program
Found a video where I had the startup, shows it loading up RPD24 Driver Module Version 1.25.
1 Attachment(s)
Re: SF Model w/ Updated Pendant Style Controller, lost program
This is where (see pic) I sent a standard G-code text file to in MotionMechanic. Can anyone confirm that I overwrote the controller program? In times like this a man needs an UNDO button. Thanks folks.
Re: SF Model w/ Updated Pendant Style Controller, lost program
Jimmy
When you get a chance give me a call I might be able to help you out.
Maurice
MCP Service
678-5481-483
