G1025 (engraving) WT-150 Nakamura
Hi guys, hope you can help,
We’re trying to use the g1025 engraving cycle on a wt150 nakamura but each time we run the simulation it alarms out with 3537 wrong cutting method.
we use the cross engraving template in manual guide I which provides the whole template and follow the stages but we are stumped.
any ideas what could be wrong?
this is the line it alarms out on. (It’s in metric)
g1025 c2. F.05 E.05 p4. H-20. v0. B38.1 L0.15 u10. A1. (TEST)
Thank for your help
Re: G1025 (engraving) WT-150 Nakamura
Same error code on new SMEC sl2000sy , adjusted radius of tool to a made of value and offset dimension in canned cycle to compensate and working fine now