Hitachi seiki lathe HT 20j seicos j multi

hi i need some help, Im not to familiar with this control.I need to run a new program. the new program is already in the directory in the Hitachi seiki lathe HT 20j seicos j multi
need to call the new the program to run it .is anyone familiar with this control.
thank you

Quote:

---

Originally Posted by Leon2001

hi i need some help, Im not to familiar with this control.I need to run a new program. the new program is already in the directory in the Hitachi seiki lathe HT 20j seicos j multi
need to call the new the program to run it .is anyone familiar with this control.
thank you

---

Hello
When you go to auto mode, type O0001 or what ever the program number is and press the down arrow to call that program up

John


Sent from my iPhone using Tapatalk

Could you help me? I just bought a Hitachi 23 j lathe and I have problems performing set 0 in z and x for a new program?

Could you help me? I just bought a Hitachi 23 j lathe and I have problems performing set 0 in z and x for a new program?

Send me a PM and I will assist

John

Hi John,

I was looking at a nice condition Hitachi Seiki HT20J with Seicos J Multi.
Not sure what control its based on but does your team still have parts/support for this
"classic" ?

Hello!
Yes, so the J series are based on Yasnac J300 - parts and knowledge are readily available; they are robust and I rarely have to work on them as the parts are more reliable and last longer than some other controls.

That is good to know! Is there anything in particular to watch for on the HT 20J?