Syil Spindle Still No Bueno -
Hey All,
I'm at my wits end with this Syil X4. I've had the spindle board rebuilt, still no movement. Vid here on where I'm at:
https://www.youtube.com/watch?v=aR2ErJ4v8Wk
At this point I'd be happy to replace the spindle control (and motor if necessary) Anyone PLEASE!!! Help!
Anything I haven't tried with my current set up?
Anyone who has replaced all the guts in your Syil X4?
Please hook a brother up :)
Thanks,
CE
Re: Syil Spindle Still No Bueno -
Re: Syil Spindle Still No Bueno -
Do you have a photo of the controller card?
Is it an XMT_DRIVER_1500 like this one?
https://www.cnczone.com/forums/bench...-sx4-bldc.html
1 Attachment(s)
Re: Syil Spindle Still No Bueno -
Neil and Maxspongebob,
I was hoping you guys would show up! You both have tried to help me before. In fact in the last thread someone recommended the guy I sent the board to for rebuild
Attachment 443548
Previous thread.
https://www.cnczone.com/forums/syil-...ive-motor.html
1 Attachment(s)
Re: Syil Spindle Still No Bueno -
When I had everything pulled out that went to the rebuilder....
Attachment 443550
If any close up shots will help I can take more pics
Thank you!
Re: Syil Spindle Still No Bueno -
Hey Neil,
The big board at the bottom is:
Honcar HBLC-1100-300H-S0018A
Power Main Board Ver 1.0 2012.05.18
The little board at the top is:
Tonman PCF12171 Rev. 1.1
Thank you!
Chris E.
Re: Syil Spindle Still No Bueno -
Oh and the A is in parens.......
Honcar HBLC-1100-300H-S0018(A)
sorry,
CE
1 Attachment(s)
Re: Syil Spindle Still No Bueno -
Sorry. Don't recognize any of those numbers.:mad:
Try this: Closest I could find. Look at page 41. Get the Estop wiring correct.
Ref:
https://manualzz.com/doc/6958602/x4-plus---syil-america-bench-top-cnc-mills
Re: Syil Spindle Still No Bueno -
Quote:
Originally Posted by
neilw20
Hey mate could you PM me please. I tried to PM you but it won't let me. Just have a few questions I think you'd be able to help me with.
Thanks.
Sent from my Pixel 3 using Tapatalk
Re: Syil Spindle Still No Bueno -
Quote:
Originally Posted by
Stifffy
Hey mate could you PM me please. I tried to PM you but it won't let me. Just have a few questions I think you'd be able to help me with.
Thanks.
Sent from my Pixel 3 using Tapatalk
Your pm box must be full. It blocked my send.
neilw21 at y7mail • com
Re: Syil Spindle Still No Bueno -
Quote:
Originally Posted by
neilw20
Your pm box must be full. It blocked my send.
neilw21 at y7mail • com
Emailed you mate
Sent from my Pixel 3 using Tapatalk
Re: Syil Spindle Still No Bueno -
Can you guys please share the solution if one was found? I have an X4 style machine but it is older and slightly different but I can't get MACH3 to control the spindle either. Thanks!
Re: Syil Spindle Still No Bueno -
Quote:
Originally Posted by
anime2485
Can you guys please share the solution if one was found? I have an X4 style machine but it is older and slightly different but I can't get MACH3 to control the spindle either. Thanks!
What are the identifying marks on your spindle controller?
Look here for my solution. https://www.cnczone.com/forums/bench...-sx4-bldc.html