-
Matsuura MC510 VG
Hello
I have a Matsuure MC510 VG with 4th nikken (cnc170). J300 control
Some time ago my computer crashed
I got the parameters from matsuura. I typed first
optional parameters followed by Sequence parameter and other parameters
I also have programs loaded from the machine above O9000
But when I try to call the tool in MDI, e.g. T2M6, the message 2180 Sequence Error pops up
Neither can I make the divisor rotate with the M11 command. This is how I was doing the rotation before.
-
Re: Matsuura MC510 VG
Makro40,
2180 is an indicator that the PLC is in alarm. To read the alarm you must go to ALARM then "USER" soft key for details of the message.
-
Re: Matsuura MC510 VG
I have noticed one more thing. When I enter all the parameters and base the x. Y, Z axes and I will not move the Z axis, the machine changes the tools.
However, as soon as I run the machine from the program and the Z axis moves, then error 2180 Sequence Error pops up. As if it didn't know where to go for a tool change.
-
2 Attachment(s)
Re: Matsuura MC510 VG
Below are pictures from the alarm