voiern wr4040 laser cutter default settings
Hi, I need a little help and wondered if someone could help me out, I recently bought a voiern wr4040 laser cutter equiped with a RDC6442G "Ruida" controller. The Machine was working great, until I messed up a few setting and had the bright idea to do a parameter reset, thinking it would put the setting back like they where when I got the machine, but instead it reseted all setting to default for the DC6442G. Now the machine doesn't go to home, goes reverse in the y axis and move super slow. Contacted the seller but still haven't answered me. Anyone got a similar machine and can get me the default setting ?
Re: voiern wr4040 laser cutter default settings
Ok, I got some of the settings back by myself and can use the machine again, only problem is : the laser power seem a lot weaker then before, when I tested it using the pulse button I was making a hole in 3mm wood pratically instantly, now it doesn't make it trough even if i hold the pulse for a few seconds. tested with a cut i used to be able to make trough the same wood in one pass and now it doesn't even go halway when cutting. Did I somehow bust the laser some way or is there a setting I messed up ?
Re: voiern wr4040 laser cutter default settings
I have the exact same problem. Did you manage to fix it somehow?
Re: voiern wr4040 laser cutter default settings
sorry to jump on the thread but can i ask where you bought it from im looking to get the WER-6040 and looking to find a supplier rather than go direct to china.
cheers in advance.
Re: voiern wr4040 laser cutter default settings
Quote:
Originally Posted by
carlalvey
sorry to jump on the thread but can i ask where you bought it from im looking to get the WER-6040 and looking to find a supplier rather than go direct to china.
cheers in advance.
Can't really help you there as buying it directly from china is what I did back then. I looked at buying it from a reseller closer to home, but that more then doubled the price of the machine !
Re: voiern wr4040 laser cutter default settings
Quote:
Originally Posted by
H120
Hi i am having the same problem, can you share the settings?
Well, My laser is not functional at the moment. I just moved into a new house and had no time to set it up, but I will either try to find the file I got the parameters from, or I will try to plug it in and get the config directly from it if you can wait a day or two.
