Hi,
Has anybody got a full alarm list for a Mazak L32 control. i'm have trouble with the Z axis. it comes up with a 141 alarm but this is not in are manual.
Any help much appreciated.
Andy
Printable View
Hi,
Has anybody got a full alarm list for a Mazak L32 control. i'm have trouble with the Z axis. it comes up with a 141 alarm but this is not in are manual.
Any help much appreciated.
Andy
141 EXCESS SIMULTANEOUS ERRORQuote:
Originally Posted by Deltaandy
Cause
The synchronization error between the master axis and the slave axis during synchronous control has overstepped a predetermined allowable value.
Action
Move either axis in the direction that the error decreases. Reduce the allowable value to zero (checking invalid), or increase the allowable value.